USB Extender



• Simple cost-effective USB Extender.

• Supports USB 1.1 and 2.0.

• USB 2.0 at 480Mbps up to 60M and USB-HID device up to 80m.

 • Tx is powered but the host, Rx requires power.

 • 4 device ports on receiver.

 • Device ports supply up to 500mA each.

 • Plug and play with all major OS.

 • No drivers required

2x1 HDMI 2.0 KVM Switcher 

 • 2xHDMI 2.0 inputs with HDCP 2.2 compliant.

 • 2xUSB 2.0 host ports.

 • HDMI output & 3xUSB device ports.

 • Automatic, front panel and IR remote control.

 • Automatic EDID management.

 • HDMI output will drive a 4K signal up to 3M.

 • Front panel LED indicators for active input.

 • Supports one microphone input and one headphone output for audio application. 

4x1 HDMI 2.0 KVM Switcher

 • 4xHDMI 2.0 inputs with HDCP 2.2 compliant.

 • 4xUSB 2.0 host ports.

 • HDMI output & 2xUSB device ports.

 • Automatic, front panel and IR remote control. • Automatic EDID management.

 • HDMI output will drive a 4K signal up to 3M.

 • Front panel LED indicators for active input.

 • Supports one microphone input and one headphone output for audio application.

KVM over Ethernet Extender 

• Extends 4k30 with high-speed USB2.0 up to 330’ over Ethernet.

 • HDCP 1.4 compliant.

 • Supports 7.1 channels of audio.

 • Less than 1ms of end to end latency.

 • ID DIP switches to pair devices on the network.

 • Plug and play, no software required.

 • 3-port USB hub on receiver.

 • May be used point to point or with a 1Gb Ethernet switch.

 • Locking DC power connectors 

100M HDBaseT 2.0 KVM Extender w/PoH 

 • Extends HDMI 1.4 & HDCP 2.2 up to 100M over a CATx cable.

 • Extends 4K60 4:2:0 up to 100M and 1080p up to 100M via CAT6a.

 • Extends 4K60 4:2:0 up to 90M and 1080p up to 100M via CAT5e.

 • Enables bi-directional IR and RS-232 pass-through.

 • Supports 7.1 multi-channel audio formats.

 • USB 2.0 pass-through with 4-port hub on receiver.

 • Bi-direction audio pass-through.

 • Automatic EDID management.

 • One-Way PoH Transmitter supplies receiver.

 • High performance ESD & surge protection circuitry.

 • All connections located on one side of each device.

 • Status LEDs on front side of the devices

USB 3.1 Active Repeater Cable AM-AF, 15 Meters without and with Power

• USB 3 Gen. 1 specifications, downward compatible with USB 3 Gen 1/2.0/1.1 devices.

 • High data transfer rate up to 5 Gbps.

 • USB bus power.

 • Plug and Play, no additional driver required.

 • Connector: USB 3 Type A male to USB 3 Type A Female.

 • External power adapter (5V/2A )for heavy power consumption devices.

 • Daisy-Chain connection up to a maximum of 2 repeater cables.   • Lockable mechanism design for secure connection.